This left-hand (LH) large fog light bracket (part number 1588187-00-C) is an OEM-matching core component exclusively developed for 2021 and later Tesla Model X vehicles, precisely fitting the front bumper’s left-side large fog light mounting structure—optimized for the Model X’s front-end airflow design and main fog light assembly dimensions. Its core function is to provide heavy-duty, stable support for the large fog light: it secures the main fog light (integrating lens, light source module, and wiring connector) firmly to the bumper’s inner frame, maintaining factory-calibrated irradiation angles (ensuring fog light beams cover the road within the safe visibility range, a key guarantee for driving safety in fog, rain, or dusk). It also absorbs medium-to-high road vibrations (preventing the large fog light from loosening, lens cracking, or wiring harness detachment during long-term driving) and acts as a structural buffer—during minor front scrapes (e.g., hitting small obstacles or branches), it disperses impact force to avoid direct damage to the fog light’s internal electronic components.

Crafted from high-strength ABS plastic reinforced with 10% glass fiber, the bracket balances structural rigidity (tensile strength ≥320MPa) and lightweight performance (≤125g). The reinforced material resists impact from larger road debris (e.g., stones or gravel kicked up by the left front wheel) without deformation or cracking, and withstands extreme temperature fluctuations (-35°C to 90°C)—suitable for harsh climates like snowy winters, coastal high-humidity environments, or high-temperature summers. Its black matte finish resists UV fading (passes 500-hour ASTM G154 UV tests, no discoloration) and chemical corrosion from road salt or car wash cleaners, ensuring long-term visual consistency with the front bumper’s inner trim and stable performance.

Installation follows Tesla’s 2021+ Model X service standards, taking 25–30 minutes with basic tools (10mm socket, trim tool): 1. Open the frunk, use a trim tool to gently detach the left front bumper’s inner main trim panel (avoid scratching the plastic clips or panel surface); 2. Locate the old large fog light bracket, remove 4 factory bolts (10mm socket) and 2 plastic snap clips to take out the worn part; 3. Clean the mounting surface with a dry cloth to eliminate dust, debris, or residual adhesive (ensuring tight fit); 4. Align the CFN bracket with the bumper’s large fog light mounting points, tighten the bolts to 8±0.5 Nm (per Tesla’s official torque specs) and snap the plastic clips into place (confirm no looseness); 5. Reinstall the large fog light assembly onto the bracket, connect the wiring harness, and test the fog light to check for beam deviation (adjust if necessary); 6. Reattach the inner main trim panel and confirm a flush, gap-free fit with the bumper.

After-sales support includes a 4-year warranty (covering manufacturing defects such as cracked plastic, misaligned mounting holes, or broken clips; excluding damage from improper installation, heavy impact, or off-road use) and protective packaging: 1 piece per pack (wrapped in anti-scratch film + hard cardboard) to prevent surface scratches or deformation during transport. For repair shops or Tesla service centers, bulk packs (18 pieces/box) are available, ensuring consistent quality for every 2021+ Model X left large fog light replacement. This bracket is a critical core component to maintain the main fog light’s safety functionality and the long-term structural integrity of the Model X’s front lighting system.